Nuts are very common parts around us. Today we will talk about the flat head rivet nut .

The round hole of the flat head rivet nut has a thread, which is characterized by the cross-section of the outer surface of the rivet nut shank is round, the head of the rivet nut is thicker, which is 1.5 mm, the lower support circle of the rivet cap A torus is a plane. Radial grooves are uniformly processed on the lower supporting ring surface of the rivet nut and rivet cap. When the rivet nut is in use, it only needs to insert its rod into the round hole of the assembly surface, and its head is supported on the mounting surface. Because the cross-section of the outer surface of the rod is circular, it is not required to be on the mounting surface during installation. The special angle assembly hole is excavated on the upper part, so it is convenient to use and high in assembly efficiency. Because the head is thicker and the lower supporting surface of the head is flat, it is smoothly combined with the assembly surface and can bear the installation of heavier parts. In addition, radial grooves are uniformly machined on the lower supporting ring surface of the rivet nut, which increases the friction coefficient between the lower supporting surface of the rivet nut head and the mounting surface, and prevents the sliding of the rivet nut. The combination with the assembly surface is more stable.

For more details, please visit the carbon steel rivet nut .