How do Clamps Wholesale Manufacturer's quick clamps work?
Quick clamp is a very easy to use and very effective tool. When you want to use a quick clamp, the first step is to place the jaws of the clamp in the correct position relative to the workpiece to be clamped. However, how to position the jaws will depend on the type of quick clamp you are using.

For example, the jaws in a spring clip are operated with a handle. The jaws need to be opened so that the workpiece can be inserted between the two. On other types of clamps, the movable jaw can easily slide along the rod until it is fully opened to place the workpiece in it.

After the claw-shaped claws are open enough to place the workpiece in it, the claws can be tightened around the workpiece. The jaws of the clamp should be tightened firmly.

If you use a spring clip with offset jaws, you only need to release the handle and the jaws will automatically close. But if the spring clip has cross jaws, you should push the handles together and lock the quick release lever to hold the part in place. If using a lever clamp, simply press down on the lever to close the jaws around the workpiece.

When the lever is pressed, the movable jaw is locked in place to prevent it from sliding off the rod. By simply unlocking the trigger and moving the movable jaws until the required pressure is achieved, the clamping pressure can be easily increased or decreased.

For more product-related information, please click: cutting tools wholesale