The clutch transmits power by axial compression and releases by means of two flat clutch plates. The greater the axial pressure of its two clutch plates, the greater the friction force generated, and the smoother and more normal the operation of the extruder. Careful maintenance of clutch discs should be done in daily use.

  This includes the things you need to do:

1. The pressure between the clutch plate, the driven wheel, and the inner and outer pressure plates is not enough so that the clutch plate is not pressed tightly, resulting in slippage. If the clearance cannot be adjusted well, you need to check the surface of the medium pressure plate and push plate for flatness and damage. Generally, their contact surface should reach more than 80%. Otherwise, it is necessary to consider replacing the middle-pressure plate or push plate and other parts, so as to avoid the burning of the clutch plate and the deformation and damage of other parts.
2. If the clutch disc is found to be seriously worn, cracked, scorched, broken, and other phenomena during operation, there shall be no problem in operation. It should be stopped in time to check whether each part needs to be replaced and repaired.
3. Pay attention to the quality of the clutch plate when purchasing the clutch plate. The surface of the clutch plate must not be deformed, warped, or loosely tightened.
4. When the inner gear ring of the clutch is seriously damaged, the force of the clutch plate during operation is inconsistent, the time is tight and sometimes loose, and the deflection angle is too large, which makes the clutch plate poorly combined, affects the normal operation of the clutch plate, and is easy to slip and burn the clutch plate and other components. At this time, the inner gear ring should be replaced in time.
5. The clutch plate shall not be stained with grease, sludge, etc. When assembling the clutch plate, be sure to check and remove these things, otherwise, the clutch will slip and affect the work efficiency.

Taizhou Benwo Auto Parts Co., Ltd. is a Clutch Cover Manufacturer and Release Bearing Manufacturer from China. The company is mainly engaged in Truck Pressure Plate, selling Heavy Duty Truck Clutch, Release Bearing, and other clutch components.