After using syringe machine every day, you must make the cleaning wheel. The steel stamp wheel, rubber wheel, and oil pump return to their initial positions. After each use, the scraper is separated from the steel stamping wheel. Pay attention to cleaning the steel stamping wheel and rubber wheel to prevent the ink from coagulating and damaging the rubber wheel and steel stamping wheel when the machine is turned on again.

The double-sided tape on the cleaning wheel must be replaced every day, 1-2 times a day. Apply lubricating oil to the guide rails of the adjustment mechanism regularly to prevent it from drying out and causing jamming, usually once every 3-5 days. Regularly open the end cover of the bearing to check the lubricating grease. Generally, add it once every 1-2 months to ensure the flexible operation of the bearing. Keep the desktop of the machine clean and tidy at all times, and rigorous screws and other debris can be mixed into the machine. For long-term shutdown, please disconnect the power and air source, and put on a dust cover.'

Welcome to contact us if you are interested in safety Syringe Assembly Machine!