Setting up your HP Envy 5055 printer for wireless use is a straightforward process. Here are the simple steps you can follow:

Unpack the Printer: Remove all the packaging materials and tapes from the printer.

Power on the Printer: Connect the power cord to the printer and plug it into an electrical outlet. Turn on the printer using the power button. HP Envy 5055 Wireless Setup

Install Ink Cartridges: Open the ink cartridge access door and install the provided ink cartridges. Make sure to follow the color codes and properly seat them into the designated slots.

Load Paper: Slide out the paper input tray and load it with plain, white paper. Adjust the paper width guides to fit the paper size.

Connect to Wi-Fi: On the printer's control panel, navigate to the Setup menu. Select "Wireless" or "Network Setup," then choose "Wireless Setup Wizard." The printer will scan for available wireless networks.

Select Your Network: From the list of available networks, select your Wi-Fi network and enter the Wi-Fi password if prompted.

Confirm Connection: Once connected, the printer will display a confirmation message. Make sure the wireless light on the printer is solid and not blinking.

Install Printer Software: If you haven't already done so, download and install the latest printer software and drivers from the official HP website. During the installation process, you will be prompted to choose a connection type, so select "Wireless."

Complete the Setup: Follow the on-screen instructions to complete the software installation. This may include registration, alignment, and calibration processes.

Test the Printer: Print a test page to ensure that the wireless setup was successful and the printer is functioning correctly.

Congratulations! Your HP Envy 5055 printer is now set up for wireless use. You can print wirelessly from any device connected to the same Wi-Fi network as the printer. If still you getting Some problem Visit 123-hpp.com for Further help.