Blog Information

• Posted By : jianguan ccc
• Posted On : Jan 08, 2021
• Views : 186
• Category : General
• Description : Grid elastic line: carefully elastic line according to room size and plastic board specifications. The size and shape of the basic grid should be determined according to the design pattern, room size and the specific size of the plastic board. When dividing the grid, you should consider reducing the number of welding as much as possible, taking into account the symmetry of the grid. People with insufficient walls around the room can use edge treatment. From the center of the room to the surroundings, the grids are bouncing lines to ensure the symmetry of the grids. People with insufficient walls around the room can use edge treatment. Before pasting, flex the lines on the ground according to the design grid size, and the grid size should generally not exceed 90 cm. Please keep a width of more than 12 cm when you bounce the line around the room or at the base of the column. When attaching the plastic skirting board, trim it. PVC soft board price

Overview

• 1. Grid elastic line: carefully elastic line according to room size and plastic board specifications. The size and shape of the basic grid should be determined according to the design pattern, room size and the specific size of the plastic board. When dividing the grid, you should consider reducing the number of welding as much as possible, taking into account the symmetry of the grid. People with insufficient walls around the room can use edge treatment. From the center of the room to the surroundings, the grids are bouncing lines to ensure the symmetry of the grids. People with insufficient walls around the room can use edge treatment. Before pasting, flex the lines on the ground according to the design grid size, and the grid size should generally not exceed 90 cm. Please keep a width of more than 12 cm when you bounce the line around the room or at the base of the column. When attaching the plastic skirting board, trim it. PVC soft board price
  2. Blanking and pre-laying: In order to facilitate adjustment, pre-laying must be done after blanking. The material must be based on the actual size of the room floor. When cutting, spread the pvc furniture board flat on the ground or operating platform, draw a cutting line on the board, and cut with a V-shaped cutting knife. The edge of the board must be cut into a smooth groove, and the groove and mouth angle of the combination of the two boards is about 55 degrees. The day before the soft PVC floor is formally pasted, it should be laid in advance according to the division. When paving, try to take care of the same color tone and the same thickness. The pre-paved panels must not be moved and must be pasted the next day. PVC soft board wholesale
  3. Paste: Open the pre-paved soft PVC floor, pour two-thirds of the special adhesive into the base layer and the sticking surface of the soft plastic board, and apply it horizontally and horizontally with a brush or a toothed board (no brush) After 3~4 minutes, apply the remaining 1/3 of the paste on the base layer and the paste surface in the same way. After 5-6 minutes, align the periphery of the soft plastic board with the basic grid line. After the high-speed joint meets the requirements, apply pressure to the back side. Roll back and forth with a roller from the center of the board to the surrounding, or use a special plastic including board to roll back and forth, exhaust all the air under the board, make the board surface and the base layer close contact, and discharge the sand bag for compaction. After each piece of glue is laid and vented, please wipe the glue on the edge of the ground to prevent the glue from affecting the joint accuracy after drying. For those with edges, first of all, those without edges must stick to the edges, and they can stick to the door from the inside of the room to ensure that the board will not be disturbed by walking. After the soft PVC floor is pasted, the temperature of the construction site should be maintained at 10 to 30 degrees within 5 to 10 hours, and the ambient temperature should not exceed 70%. No one can leave within 24 hours after pasting.
  4. Seam welding: Seam is an important means to ensure the flatness and integrity of the ground. Welding must be substantial and clothed. PVC soft board manufacturers
  5. Wax treatment: Before handing over, wax the floor surface to improve the brightness of the floor. After welding the board seam, the PVC soft board can be waxed to improve its cleanliness and decorative effect.

  We are one of the PVC foam board manufacturer and welcome to your come and purchase!