Event Details
-
rotary degasser out adopts a compact furnace body layout. in the porous ceramic clear-out, a rotating nozzle is used to degas the molten aluminum, forming convection within the container, in order that small bubbles can be fully subtle within the molten aluminum.
The touch floor among bubbles and molten aluminum is enlarged; at the identical time, a sealed layout is adopted to prevent secondary pollution resulting from access of outdoor air and enhance the degassing performance of the equipment.
unique manage
The workstation degassing technique is adopted. The aluminum liquid can hold the temperature via electric-powered heating all through the running gap. The heating machine adopts an immersion heating tool with high heating efficiency. The silicon carbide heating detail is used to manipulate the temperature, with excessive temperature manipulation accuracy, and is easy to use.
smooth to operate
It adopts a one-key transfer, the layout is straightforward and easy to use, reduces the complexity of the system, and reduces the device renovation price. on the same time, the system layout takes into consideration the one-of-a-kind necessities of users for casting first-rate. The refined fuel drift rate and the rotor speed are adjustable.
clean protection
it's miles convenient for system protection and the benefit of rotor replacement. The rotating nozzle component and the heater component may be listed one at a time, and the upper cowl can be lifted and turned around horizontally to maximize the convenience of upkeep operations.
safe operationa
The system has an interlocking mechanism to avoid harm as a result of misoperation.
The use technique of rotary degasser out in a country-wide aluminum melting and casting plant
1. gas control cabinet: strain 0.3Mpa; go with the flow of every rotor: argon zero.five-four Nm3/h, chlorine 0.010.05 Nm3/h.
2. electric powered manipulate cabinet: meet system requirements and understand numerous features.
three. The air tightness inspection stress of trotary degasser is 0.4Mpa, there need to be no leakage inside 14 hours, and the gadget pressure is zero.4Mpa.
≥60% or 1xxx. 3Xxx collection alloy after degassing[H]≤zero.12mV100g aluminum
≥60% or 2xxx, 7xxx series alloy after degassing[H] ≤zero.14ml/100g aluminum
≥60% or 5xxx collection alloy after degassing【H】≤0.16ml/100g aluminum.
5. quantity of slagging:
1xxx.3xxX series alloy slagging ability after degassing -
4/20/23 at 4:00 AM -
7/20/23 at 5:00 AM -
Wherehenan Map
-
Hosteve
-
Led by
-
Category
-
RSVPs
- 1 attending
- 0 maybe attending
- 0 not attending
- 0 awaiting reply
