Informations sur le groupe

• Mold Release Agent Suppliers Affaires et Finance
• Mold Release Agent Suppliers introduces how to use mold release agent:
  
  1. Thoroughly clean the mold with suitable cleaning water to remove the previous residual release agent and other contaminants, and then wipe the water with a clean...plusMold Release Agent Suppliers introduces how to use mold release agent:
  
  1. Thoroughly clean the mold with suitable cleaning water to remove the previous residual release agent and other contaminants, and then wipe the water with a clean cloth.
  
  2. Please shake the bucket before use. If there is precipitation, it will not affect the effect after shaking.
  
  3. Air-assisted spraying equipment can be used, or it can be wiped with a brush and cotton cloth.
  
  4. On the pretreated clean mold, wipe the mold with paint once. The release agent completely covers the mold to form a strong film.
  
  5. Just after spraying the air gun, the release agent can also be blown off. After the concentrated liquid release agent has evaporated, it can be coated in a mold or directly filled.
  
  6. The dilution factor of the release agent should be determined according to the complexity of the product, the density of the solvent used and the actual operation.
  
  7. The general dilution of the concentrate is 10 to 15 times.
  
  8. It is...  Moins
• • ritchie silways (propriétaire)
• • 263 total des vues
  • 1 membre total
  • Dernière mise à jour 8 novembre 2021