1. When removing the pvc furniture board ceiling, remove the slats at one end, take out the boards from the slats one by one, replace the damaged boards with new ones, and reinstall the pressed slats. Pay attention to minimize the color difference when replacing. Precautions for pvc ceiling removal (it is recommended to ask dedicated personnel to remove it to avoid damage and replacement of pvc ceiling)

2. 
   When removing the pvc board ceiling, the equipment and facilities in the original ceiling should be considered to avoid damage to the pipes and equipment during removal; when removing the original ceiling in the kitchen and bathroom, avoid damaging the ventilation ducts and flues; It should be dismantled as much as possible and no further use is considered.

　　 3. Second-hand house decoration design should give priority to the safety of the ceiling. In particular, some old houses that have been used for more than fifteen years have begun to age. In addition, due to the requirements of the suspension structure during the original suspended ceiling construction, many holes were drilled on the top surface, which reduced the local bearing capacity.

　　 4. The removal and transformation of the pvc board ceiling in the kitchen and bathroom should pay attention to the impact on the indoor light source. The ceiling height should be moderate, which will affect the future wall decoration and soft decoration.

　　 5. It is also necessary to pay attention to the echoing relationship between the pvc ceiling and the floor. When the floor function and the ceiling are not symmetrical, it will affect the placement of furniture and other furnishings in the future.

The main advantages of pvc furniture board made by PVC foam board manufacturer are light weight, easy installation, waterproof and moisture-proof, mothproof, large changes in surface color and pattern, pollution resistance, easy cleaning, and good sound insulation and heat insulation performance. In particular, flame retardant materials are added to the new process to enable it to extinguish the fire when it leaves the fire, making it more reliable to use.