When it comes to choosing a brand-new roof, the type of roof that consumers choose is critical to making the most cost-effective and environmentally friendly decision possible.

Typically, home owners boil it down to the following:

Roofing with Asphalt Shingles

Roofing Made of Metal

A common problem with metal roofing  that consumers need to be aware of should be considered before deciding on a metal roofing option.

The Most Common Metal Roofing Issues That May Influence Your Final Decision # 1 – Oil Canning Metal Roofing Issues

In accordance with the Metal Construction News, oil canning occurs when the flat areas of sheet metal panels on a metal roof have waviness in the flat areas of the panels. The use of light-gauge, cold-formed metal materials such as copper, zinc, aluminum, and steel is typical of this type of fabrication.

Consider the following scenario: the standing seam of the metal system becomes overstressed and is no longer able to maintain its flat shape. Investing in a thicker metal is beneficial.

Oil canning occurs for a variety of reasons, including:

Metal is coiled to an extreme degree. Stress as a result of coil cutting.

The tension created by roll forming panels.

There is insufficient space designated for the expansion and contraction of the panels.

The installation was done incorrectly.

Structure changes caused by the movement of panels cause friction.

#2 – There is leaking

Metal roof leaks are not an exception to the rule of leaking roofs. A common occurrence with metal roofs is leaks, which can be caused either by human error or by the material itself. There is no other way to put it.

There are several common causes of metal roof leaks, including the following:

Winter weather (such as snow melting or ice melting)

Strong winds are forecast.

Damage caused by the structure of the house itself

Heavy rains and downpours are forecast.

All of that being said, installer mistakes are the most common cause of leaks originating from a metal roofing system.

Request information from your installer about the steps they are taking to avoid the Five Most Common Problems with  metal roofing  when it comes to leaks:

Are the fasteners you're using the proper size and type? It is possible for water to seep through screws if they are either too loose, too tight, or not centered correctly.

Are the seams going to be properly sealed? If this is not done, leaks will occur.

Will you be using butyl tape in your project? Most metal roofing professionals will employ butyl tape, but they must ensure that they adhere to industry standards when applying the tape. When applied correctly, the tape will seal out dirt and water, preventing leaks of any kind.

The devil is in the details. If you do not inquire about specifics, it is possible that your roofing structure and the interior of your home will suffer as a result. Check to see that your installer is adhering to the manufacturer's recommended installation guidelines.

Scratching and scuffing are common. Almost anything made of metal will be scratched easily. You'll want to make certain that your installer is qualified in the following areas:

It is important to avoid rubbing the metal panels together when installing them, as this will cause the coating to be stripped.

Using edge guards to protect your furniture.

Lifting devices are being used.

Rust and decay are the third and final elements.

One of the primary reasons people shy away from metal roffing is the inevitable corrosion that occurs with it. Despite the fact that metal roofing is designed to resist rust, it can sometimes backfire due to the following reasons:

Because the metal has been improperly coated, there is rust beneath the surface.

Areas where the presence of saltwater is common.

When different types of metals are used together.

It occurs when the edges of cut materials are not properly concealed or sealed

#4 – Metals and materials that are not related to one another

When two different types of metals are used on the same roof, staining and failure will occur sooner rather than later. For example, it is best not to come into contact with the metal when using:

Treated lumber, concrete bricks, and copper are all available.

#5 – Mistakes Made During the Installation Process

In the shipping industry, it is common for materials to be misplaced after they have been received during the shipping process. In that case, "Was there anything missing when the metal roof was delivered?" is a great question to ask your installer.

Unfortunately, installers may fail to properly install your metal roof because they do not want to spend the time necessary to wait for replacement parts to arrive. It's a shame, but it's true.

Typical Metal Roof Components That Are Missing

Screws, Flashing, and Additional Accessories

Typical Metal Roof Components That Are MissingScrews, Flashing, and Additional AccessoriesThe best way to avoid the Five Most Common Problems with   metal roofing  is to avoid using it in the first place. Asphalt Shingles are the way to go in this situation.