How To Handle Remote Control Maneuvering Systems In Ships Properly?

A Remote control Maneuvering system is very useful for deck officers and ship engineers, for safely steering a ship from a control station (engine room or bridge), and making the process of operation and monitoring of Marine engine power plant much more convenient.

This system is very important in a ship or any vessel and it is important for Marine engineers to have a proper understanding of how the remote control system works in maneuvering the primary engine. Before handling any maneuvering system in South China it is important to remember these tips.

Remember operational failure potential due to voltage drop

If power from the shore is connected to the ship in dry dock or in layup, make sure that the power supply switches of the remote control system are turned off. This is because, during power supply transfer there is a drop in voltage - which can cause damage to the remote control system. Due to this reason, there can be an operational failure of the system.

Prior to the application of megger or withstand voltage test to this type of circuit, consider all the wires to the unit which can prohibit this test - so as to keep the electronic device safe.

Touch components and cover / door with care

While operating components of remote control, you should not touch any part of machinery or open any cover / door. Doing this can be quite dangerous and can result in malfunction - in case treated improperly at the time of operations.

After performing maintenance on the devices, including the boiler control system, you should put cover / close the door on them in order to prevent the entry of foreign material or dust. Check every remote control operation You should always inspect all the remote control operations from the engine control room and maneuvering handle, prior to leaving or entering port. In case automatic slowdown / shutdown stops the main engine, first and foremost what you have to do is move the maneuvering handle to the stop position. Then, prior to restarting the engine, you should troubleshoot the issue.

By taking care of all these things, it can be easier for you to make your remote control maneuvering system continue working properly.