Automobile Elevator Exporter introduces elevator installation precautions:

1. Clearly select the localization category of the elevator. At present, there are three main types of elevators in China: traction elevators, screw elevators and hydraulic elevators. The rotary elevator car is operated by the mutual movement between the nut and the screw. Runs are usually slower because of structural constraints. Two-story three-screw elevator, car design, light weight, low noise, more suitable for the installation of duplex buildings, LOFT apartments and overlapping villas. Due to many problems, hydraulic lifts have basically disappeared in my country, and are widely used in factories and workshops. The traction elevator is pulled by the traction main engine, the car and the counterweight are balanced with each other, the operation is stable, the technology is mature, and it is energy-saving and efficient. However, there are higher requirements for civil engineering dimensions: pit depth, roof height, and well width dimensions. Self-built houses generally reserve enough space and deep enough pits, so traction elevators are suitable for installation.
2. After selecting the type of elevator installation, the owner can contact the technicians of the elevator manufacturer to design the elevator shaft at the beginning of the building, because it is built together with the residence. Generally speaking, the depth of the tractor lift is between 150mm and 450mm, and the height of the high-rise is more than 2500mm, depending on the technical capability of the manufacturer. It should be noted here that the pit walls should be completely waterproof. Because the depth of domestic elevators are all special-shaped, the car area does not exceed 1.6 square meters, and the width and depth of the hoistway can be arbitrarily matched according to needs. And according to the guidance of the manufacturer's technicians, determine the position and size of the inner ring beam, the door head beam, the sill beam and the main frame beam. When the elevator shaft is completed, contact the manufacturer's technicians to check the size of the door opening, and then arrange the production and installation of the elevator.

Through the above introduction, Observation Elevator Exporter hopes that you can simply refer to the content of this article in future use.