Lifting Sling Suppliers Lifting slings Removing the protective cover from the main body will not affect the lifting slings. Other placed objects will affect the lifting operation and even cause serious lifting accidents.

When using synthetic fiber slings to lift an object, for example, when choosing a pocket sling, that is, a U-shaped sling, when two round slings are used to lift an object at the same time, many people will choose to use a bolter after hoisting. Tidy up the flat straps. Two lifting slings are bolted to both sides of the lifted object. In response to this phenomenon, the lifting belt manufacturer gives the following suggestions:

1. The fiber webbing arranged in the U-shaped hoisting arrangement should not be fastened and fixed. Even if the arranged tension belt does not change the stress point of the hoisting belt, it should not be arranged, because the fastening device may be damaged during the process of lifting the object. . Cause damage to the spreader, thus affecting the lifting operation.

2. The reason why Ratchet Tie Down Manufacturers 15-ton flat slings are fixed with binding straps in U-shaped hoisting operations is because most of the synthetic fiber slings are arranged closer to the edge of the object, and they are worried about peeling off during the hoisting process. Ascension process. Manufacturers of ratchet tie-downs say that even with both slings secured, they would not be able to intercept them in the event of an accident.

Boat Winch Manufacturers,

G70 Transport Chain

Notes On The Use Of Boat Winch Manufacturers Products
Use Of Boat Winch Manufacturers Products
Application Introduction Of Boat Winch Manufacturers
G70 Transport Chain Notes
Attention To The Use Of G70 Transport Chain
G70 Transport Chain Application Notice

Precautions for lifting belts for aerial work

1. Do not use damaged lifting slings for G70 Transport Chain: Many lifting slings are damaged before use. The lifting strap itself has tiny cracks, which will break if the load is too large. Many employees did not carefully check the lifting sling itself when working at heights, and misused the damaged lifting sling, causing accidents.

2. Do not use knotted or twisted slings: If you observe the knotted and twisted slings with a magnifying glass, you will find that the surface is uneven. The weight capacity of such lifting slings is often not what is stated on the label. Once the high-altitude operation is carried out and the load is too large, the lifting belt will break and cause an accident. Therefore, such a sling cannot be used.

3. Boat Winch Manufacturers operate in a suitable working environment: when working at heights, the environment in which the lifting sling is used is also very important. For example, nylon slings can quickly fail in acidic environments. Polypropylene slings are acid and alkali resistant. Therefore, when using a lifting sling, you must first read the relevant instructions and choose a lifting sling suitable for the working environment.