Do you all know how to install the radiator made by the auto radiator tank plastic mould water tank? What is its classification? What should I do if something goes wrong? I think most people are not sure what to do.

Regarding the installation of the radiator: the radiator is divided into three installation methods: same side entry, same side exit, different side entry, different side exit, bottom entry and bottom exit. No matter which method can be installed successfully, we must Try to reduce the number of pipe fittings. The more pipe fittings, not only the cost will increase, but most importantly, the hidden danger will also increase.

There are two main classifications of car radiators, one is copper and the other is aluminum. The difference is that the former is used for ordinary cars and the latter is used for large commercial vehicles.

The hose of the engine radiator will age after long-term use, and it is easy to rupture. Water can easily enter the radiator. The hose ruptures during driving. The high temperature water sprayed out will form a large group of water vapor from When this phenomenon occurs, you should choose a safe place to stop immediately, and then take emergency measures to solve this problem.

Under normal circumstances, when the radiator is filled with water, the joint of the hose is most likely to crack and leak. At this time, you can use scissors to cut the damaged area, and then re-insert the hose to the radiator water inlet connector. And clamp it with clips or wire. If the crack is in the middle of the hose, you can wrap the leaking crack with tape. Wipe the hose clean before wrapping. After the leaking part is dry, wrap the tape around the leaking part of the hose. Because of the water in the hose when the engine is working The pressure is high, so try to wrap the tape tightly. If you don’t have tape, you can wrap the plastic paper around the crack first, then cut the old cloth into strips and wrap it around the hose. Sometimes the hose has a large crack and water may still leak after wrapping. At this time, the water tank cover can be opened to reduce the pressure in the water channel and reduce leakage.

After adopting the above measures, the engine speed should not be too fast, and we should try to drive at a high-end speed. We also need to pay attention to the pointer position of the water temperature meter during driving. When the water temperature is too high, we should stop to cool down or supplement the cooling water.