The cleaning of the rubber extruder requires safety measures in the details. Especially in the installation of import and export pipelines, the operator especially needs to strengthen the audit to prevent cleaning troubles caused by installation failure. Before use, you must first check whether the inlet and outlet pipes have been installed. If there is any transmission, it should be remedied immediately. Moreover, the water inlet pipe and the water outlet pipe are fixed in the water tank to fully ensure that leakage is not easy to occur during the water flow. Of course, import and export cannot be shaken. Secondly, when cleaning the rubber extruder, in order to give full play to the high efficiency of cleaning, the operator should also follow the operation sequence and not skip the operation. This process requires the water inlet pipe to be completely filled with liquid, or to open the top cover of the extruder to remove the top cover, and then pour water from the filter cartridge so that the water inlet pipe is completely filled with liquid to provide a guaranteed cleaning effect.

Here is the content about cleaning the rubber extruder. I hope everyone can pay more attention to the cleaning of the rubber extruder after reading the above content. Everyone knows that mechanical equipment has a service life, so everyone must do a good job of maintenance. In addition, if you need to buy a rubber extruder, you are welcome to contact us at any time!

If you have interests about microwave curing oven, welcome to contact us!