-
-
The gear pump is compact and simple, with a limited number of moving parts. Gear pumps cannot match the pressure generated by reciprocating pumps or the flow rate of centrifugal pumps, but they have higher pressure and throughput than vane pumps or lobe... moreThe gear pump is compact and simple, with a limited number of moving parts. Gear pumps cannot match the pressure generated by reciprocating pumps or the flow rate of centrifugal pumps, but they have higher pressure and throughput than vane pumps or lobe pumps. Internal gear pumps have better suction capacity than external gear designs, and although the applicable range is from 1 cP to more than 1,000,000 cP, they are more suitable for high viscosity fluids.
Since output is proportional to speed, internal gear pumps are usually used for metering and mixing operations. The internal volume is small, and the liquid flowing through the pump can be reliably measured to achieve precise flow control.
Internal gear pumps can be designed to handle corrosive liquids. Although they are usually made of cast iron or stainless steel, new alloys and composite materials enable pumps to handle corrosive liquids such as sulfuric acid, sodium hypochlorite, iron chloride and sodium hydroxide.
If you need help... less
led by
Cassidy vanepump
-
The Oil Pumps in the internal combustion engine circulates the oil under pressure to the rotating bearings, sliding pistons and camshafts of the engine. This lubricates the bearings, allows the use of large-capacity fluid bearings, and also helps... moreThe Oil Pumps in the internal combustion engine circulates the oil under pressure to the rotating bearings, sliding pistons and camshafts of the engine. This lubricates the bearings, allows the use of large-capacity fluid bearings, and also helps cool the engine.
In addition to the main purpose of lubrication, pressurized oil is also increasingly used as hydraulic oil for powering small actuators. One of the first significant uses of this approach was hydraulic tappets used in camshaft and valve actuation. Recent applications that have become more common may include tensioners for timing belts or transmissions for variable valve timing systems.
Not all engines have the same fuel injection requirements. For example, a high-performance engine puts more pressure on the lubrication system. In this case, the lubrication system must be particularly robust to prevent engine damage. Most car engines on the road today do not exceed 5,000-6,000 rpm, but for high-performance engines, this is not always... less
led by
Cassidy vanepump
-
Hexamethyldisiloxane (HMDSO) is an organosilicon compound with the molecular formula O [Si (CH3) 3] 2. The volatile colorless liquid is used as a solvent and reagent in organic synthesis. It is prepared by hydrolysis of trimethylsilyl chloride. This... moreHexamethyldisiloxane (HMDSO) is an organosilicon compound with the molecular formula O [Si (CH3) 3] 2. The volatile colorless liquid is used as a solvent and reagent in organic synthesis. It is prepared by hydrolysis of trimethylsilyl chloride. This molecule is a typical disiloxane, similar to the subunits of polydimethylsiloxane.
Hexamethyldisiloxane can be prepared by hydrolysis of trimethylsilyl chloride:
2 Me3SiCl + H2O → 2 HCl + O [Si (CH3) 3] 2
It is also produced by the hydrolysis of silyl ether and other silyl-protected functional groups. HMDSO can be converted back to chloride by reaction with Me2SiCl2.
Hexamethyldisiloxane is mainly used as a source of trimethylsilyl functional groups (-Si (CH3) 3) in organic synthesis. For example, in the presence of an acid catalyst, it converts alcohol and carboxylic acid to silyl ether and silyl ester, respectively.
It reacts with oxidized rh (VII) to form silicate complex:
Re2O7 + O [Si (CH3) 3] 2 → 2 O3ReOSi (CH3) 3
Niche uses
HMDSO is... less
led by
ritchie silways
-
Avoid light
Direct sunlight is very helpful to increase the temperature of the server. Unfortunately, the higher the server temperature. The more likely it is to cause problems, which is very detrimental to the stability of the server system. In... moreAvoid light
Direct sunlight is very helpful to increase the temperature of the server. Unfortunately, the higher the server temperature. The more likely it is to cause problems, which is very detrimental to the stability of the server system. In addition, direct sunlight is very detrimental to the monitor in the computer room. Due to direct sunlight, the life of the monitor can easily be halved or even longer. Especially in some large-scale computer rooms, you can hardly see a little sunlight. This environment maintains the server cabinet very well.
In some small computer rooms, due to the need to make full use of the rental cost of space. The facilities in the room are very crowded. It is possible that there is a large window facing the room not far away. Such windows can easily cause sunlight from outside to affect the server cabinet, and such an environment is often not very stable, and dust may enter, causing great damage to the server cabinet.
Therefore, in the computer room where sunlight... less
led by
karam dingli
-
Rack-mounted cabinet
Rack-mounted cabinets network cabinets are those cabinets that have movable doors at the front and back. The side panels and mounting rails in the rack-mounted cabinet network cabinet are also movable and adjustable respectively.... moreRack-mounted cabinet
Rack-mounted cabinets network cabinets are those cabinets that have movable doors at the front and back. The side panels and mounting rails in the rack-mounted cabinet network cabinet are also movable and adjustable respectively. This type of network cabinet is suitable for applications that require heavy equipment or server storage.
Open cabinet
Contrary to other types, this type of network rack cabinet does not have any doors or sides. In addition to having an open frame, this type of rack cabinet also has rails for installation. Therefore, it is suitable for applications where the rack cannot control the airflow. If it has physical security, this type also applies.
Wall-mounted cabinet
The identification function of this type of network cabinet is that it is usually fixed on the wall. This feature saves space because it can be installed in areas where typical racks cannot accommodate. In addition, cabinet shelves of this category can be closed or opened.
OEM/ODM supports... less
led by
karam dingli
-
Notebook hinge design attribute 1: damping effect
When an object is vibrated by an external force, it will produce a reaction force that attenuates the external force. Its ratio to the applied force is called the damping coefficient. Usually the... moreNotebook hinge design attribute 1: damping effect
When an object is vibrated by an external force, it will produce a reaction force that attenuates the external force. Its ratio to the applied force is called the damping coefficient. Usually the direction of the damping force is always opposite to the direction of the speed of motion. Therefore, the larger the damping coefficient of the material, the better the shock absorption or damping effect. But it is not that the greater the damping, the better. When the damping is large to a certain extent, the two objects become a rigid connection. The damping is generally used with a spring. If the damping is too large, the cushioning effect will not be achieved.
Notebook hinge design attribute 2: opening and closing angle
As the name implies, it refers to the angle at which the notebook screen is closed and rotated. There are two types of conventional designs. One is the traditional hinge design. This type of hinge design usually does not have the... less
led by
Oskar chinesestationery
-
Potassium Methyl Siliconate is a salt of organic silicon substance, which has been used as an intermediate for the production of other organic and inorganic chemicals, and an intermediate (starting material) for the production of other organic and... morePotassium Methyl Siliconate is a salt of organic silicon substance, which has been used as an intermediate for the production of other organic and inorganic chemicals, and an intermediate (starting material) for the production of other organic and inorganic chemicals, used in coatings and paints . Under highly controlled conditions in an industrial environment, it is used as an intermediate for the production of other chemicals. In non-metallic surface treatment, it is used to modify the surface of a variety of materials. In paints and paints, the substance is combined with water-bound bricks. Stone, minerals and other fillers are used in masonry treatment products as active ingredients in the waterproof treatment of the internal and external surfaces of masonry. It is consumed in use, and it is expected that there will be no remaining unreacted material in the final processed product.
Methylated seed oil surfactant is a mixture of methylated soybean oil and silicone surfactant (emulsifier). It... less
led by
ritchie silways
-
The metal bed is constructed from various types of metals and has a variety of combinations and strengths. It is important to note that the quality of the metal used may vary by manufacturer. Certain types of metal beds will have higher quality. You will... moreThe metal bed is constructed from various types of metals and has a variety of combinations and strengths. It is important to note that the quality of the metal used may vary by manufacturer. Certain types of metal beds will have higher quality. You will need to compare stores to ensure that you are buying goods that you can afford. However, regardless of quality, metal beds tend to be durable.
The metal bed is made of multiple metals, including alloys, which are a combination of at least two different types of ores or elements. Typical ores and alloys used to make metal beds are iron and steel, usually nickel and aluminum with a satin coating.
After forming the metal into a bed, it is sealed with the surface. The surface treatment of most metal beds is usually carried out by a method called powder coating, which sprays very fine pigments or resin fine particles onto the metal bed electrostatically. After application, it is baked at high temperature to produce a highly durable and smooth surface... less
led by
karam dingli
-
The gear pump is compact and simple, with a limited number of moving parts. The gear pump cannot match the pressure generated by the reciprocating pump or the flow rate of the centrifugal pump, but it has higher pressure and throughput than the vane pump... moreThe gear pump is compact and simple, with a limited number of moving parts. The gear pump cannot match the pressure generated by the reciprocating pump or the flow rate of the centrifugal pump, but it has higher pressure and throughput than the vane pump or vane pump. Internal gear pumps have better suction capacity than external gear designs, and although applicable from 1 cP to more than 1,000,000 cP, they are more suitable for high viscosity fluids.
Because the output is proportional to the speed, internal gear pumps are commonly used for metering and mixing operations. The small internal volume allows reliable measurement of the liquid flowing through the pump, enabling precise flow control.
Internal gear pumps can be designed to handle corrosive liquids. Although they are usually made of cast iron or stainless steel, new alloys and composite materials enable the pump to handle corrosive liquids such as sulfuric acid, sodium hypochlorite, ferric chloride, and sodium hydroxide.
Zhejiang... less
led by
Cassidy vanepump
Share
